Optical Switch
Opneti's 1X2 and 2X2 optical switch, based on opto-mechanical structure, is designed for use in configurable optical add/drop multiplexes (OADM), optical cross connect (OXC), optical spectral monitoring (OSM) and optical protection applications as well. The compact size and epoxy free design, assures good reliability when integrated into high-density optical system.
Features
Applications

Compact size
Epoxy free design
Low Insertion loss
Low crosstalk
Telcordia GR 1209 and GR1221 qualified

Configurable OADM
Optical cross connect
Optical performance monitoring
Optical protection application

Specifications
ParameterValue
Wavelength range 1260~1310 and/or 1510~1610
Insertion loss< 0.8 typ.<0.4dB
Return loss>=50 dB
Polarization dependent loss<0.1 dB
Cross talk<= -55dB
Repeatability<=0.05dB
Switch speed<5ms
Durability10 million
Operating power (optical)<300mW
Operating Voltage 5 ¡À 0.5 VDC or pulse
Operating current< 50mA
Operation temperature0~70
Storage temperature-40~85
 
Optical route Electric Pin Configurations
Switch typePass route1122113-5, 10-83-6, 10-7
1x21 to 2+5VDC or Pulse GND ...GND ClosedOpen
2x21 to 2, 3 to 4
1x21 to 3...GND +5VDC or Pulse GND OpenClosed
2x21 to 3, 2 to 4
Imagine 
 
Ordering Information
OSW Switch channel Latching or Non-Latching Wavelength Fiber Type Fiber Length Connector
 11=1x1
12=1x2
22=2x2
L=Latching
N=Non-Latching		 135=1310/1550nm
131=1310nm
155=1550nm
850=850nm 		1=250um Bare fiber
2=900um
X=others

1=1.0m
2=2.0m

NE=None
FA=FC/APC
FC=FC/PC
SA=SC/APC
SC=SC/PC
ST=ST/PC
LA=LC/APC
LC=LC/PC
XX=others
 
©2004~2008 Opneti Communications Co. All rights reserved.